How To Install Window Blinds In Houston

Many Houston families choose window blinds when they need more privacy and management over sunlight in their properties. They’re a functional and cost-effective window covering. They also require just a couple of steps to place for capable do-it-yourselfers. Even so, nothing is more convenient than hiring a professional window treatment installer. Here are the basics of installing window blinds and when you should call the pros to complete it for you.

Get Accurate Measurements

Before you begin, figure out if you should get inside-mount or outside-mount blinds. This crucial bit of info will let you know where to measure. Get measurements of the width, depth, and height on the inside of your window frame for inside-mount options. When hanging outside-mount blinds, find the height and width of your window, including the trim, and then increase your measurements by three inches to make sure you have proper coverage. Measure precisely–avoid rounding up or down. Improperly measured blinds will not work correctly.

Shop For Blinds

After you get your measurements, you can shop for blinds. You may already know what type of blinds you wish to have. Pick blinds that are as near to your measurements as possible. Ready-made blinds often won’t fit precisely, either jutting out too much or not reaching the window edge completely. Make sure you are provided hardware that lets your blinds install at the appropriate depth, too. You should choose tailor-made blinds for a superior fit.

Install Your Window Blinds

Your blinds may come with instructions. Follow them to attach your specific product. If you would like a sample of how hard it is to install window blinds in Houston, here are some basic steps to offer a better idea.

 

Inside Mount Blinds

 

1. Affix a bracket at the top of the inside of the window about one inch from the edge. Make sure this spot won’t interfere with the blind’s function. Utilize a pencil to indicate the bracket holes.
2. Drill pilot holes in the proper spots.
3. Align the bracket with your pilot holes and secure with screws.
4. Redo these first three steps for the next bracket.
5. Snap the end caps onto the blind’s top rail. Fit the headrail into the brackets.

Attach the tilt wand and try it out. Additionally, try out the pull cord.

Outside Mount Blinds

1. Determine if you’re attaching to the wall above the window or the trim. Hold the headrail in place and ensure the blind reaches the lower edges of the window.
2. Mark each end of the headrail.
3. Measure four inches from each headrail mark and mark here for the screws.
4. Drill pilot holes as indicated.
5. Line up the brackets with the pilot holes and attach with screws at each end.
6. Fit the top rail into the brackets.

Connect the tilt wand and try out everything to ensure it works.

Pick The Most Effortless Way To Install Blinds 

Just a reminder, you don’t have to do blinds by yourself. The most effortless way to install window blinds in Houston is to employ a professional window treatment installer. They will assist you at every step. They’ll help you find blinds that meet your requirements, make exact measurements for a custom product, and attach them for you. They guide customers daily, so they’ll handle your job efficiently and precisely. They’ll know how to troubleshoot any concerns without taking hours looking for help on websites. A window treatment expert will also have higher-quality blinds than online or box stores.

Save Yourself The Trouble And Ask Sunburst Shutters To Install Your Window Blinds In Houston

Getting new window blinds in Houston couldn’t be simpler when you work with Sunburst Shutters Houston. We’ll help you select custom blinds that will match your windows perfectly, and our professional installation team will put them up for you. All you need to do is call 713-853-9629 or submit the following form to request a free in-home consultation.